Grinding

Cambers and super polishing of surfaces up to 2m in diameter. H&M Tecnocoat can also grind in-situ. This offers the advantage of grinding large cylinders or rollers without the need to remove them from the machine.

More Information...

What Is Grinding

Grinding practice is a large and diverse area of manufacturing and toolmaking. It can produce very fine finishes and very accurate dimensions; yet in mass production contexts it can also rough out large volumes of metal quite rapidly. It is usually better suited to the machining of very hard materials than is "regular" machining (that is, cutting larger chips with cutting tools such as tool bits or milling cutters), and until recent decades it was the only practical way to machine such materials as hardened steels. Compared to "regular" machining, it is usually better suited to taking very shallow cuts, such as reducing a shaft’s diameter by half a thousandth of an inch or 12.7 μm.

Our Products...

In House Grinding

Product Group : Grinding

Properties

  • +/- 0.01 mm
  • < 0.1 Ra

On Site Grinding

Product Group : Grinding

Properties

  • +/- 0.05 mm
  • < 0.7 Ra